RSS: 
Best Practices: Power on device first, or switch HDMI matrix/input?
|
-
|
|||||||||||||||||
|
I've always wondered what is considered the best practice when switching to an activity, etc...
Should you switch the HDMI matrix input first, or turn on the device first and THEN switch the inputs? Related messages Hi guys, I've just bought a new receiver with 7 HDMI inputs, 3 optical inputs and some analog inputs. I was wondering if any of you have some advice on best practices when wiring the sources and everything behind the TV unit. I have got around 15 power supplies going to several sources and then s...
I have a 4x4 matrix switch that I use to distribute AV throughout the house. The theater room has a receiver capable of decoding HD bitstreams, however the living room and bedrooms only have TVs (no receivers). This means that even with the switch's EDID set to accept multichannel surround a...
Hi all,I have a msc400 with mx 980 setup to control my theater. I recently bought a new 8x8 switch since the device list is growing. Unfortunately the device codes are not in urc database. Do i add the codes individually and then create the macro or is there any way to transfer them to the data...
I have following set up: Sony Blue ray player, Dish Network receiver, Western digital media player, Apple TV are directly connected to my Pioneer AV receiver via 4 HDMI IN and output to SOny 3d TV in my family room and I have 5.1 speaker system setup in my family living room. I am controllin...
I have lost the master remote for the above device. Does anyone know where I can pick up the codes to program my Harmony remotes?
I get no signal through HDMI from my avr from the BDP or any other device yet when I turn off the TV it will turn off the HDMI devices. Does anyone know what the problem is? Do I need a new HDMI cable? I can watch the other inputs such as Composite or Component just fine on the TV but HDMI j...
Very good build quality and nice indicators ! Fairly large but well worth it. The Blue LEDs on the input display are quite bright but you can put a piece of Red 25a acetate filter in to dull them down to a very light purple...
Read responses in remotecentral.com |
Last videos:
|
