DIY Screen Mask
General Home Theater & Media/Game Rooms
Does anybody know a good place to buy parts in the US for making a vertical screen masking system like the one in this video?
High gain DIY AT screen at 200+ inches. Anyone have suggestions?
I will be building a new theater and want to build the biggest screen possible. The room will be approximately 24'x31'x12' to the screen with 3' behind the screen. I currently use a JVC RS-500. I will in the future upgrade to a higher lumen laser as the price comes down so that is the reason...
DIY AT Screen mask suggestions . . .
I'm looking to create some acoustically transparent screen masks, and I'm trying to hunt down some appropriate material. Does anyone know what material the pro screen manufacturers use for their AT masking, or can anyone suggest any (very) black AT fabrics that might be suitable? Thanks...
Hoping someone can shed some light on this. I have a cheapo RF controlled electric screen housing which is used for my top screen mask.When I activate the up/down action, it sends a brief "pop" through all speakers.I have tried isolating the power used for the mask, but this makes no differen...
My DIY curved screen with DIY electronic masking
Hi!The screen is made from rolled square steel tubes, about 1x1". Curve radius is about 11m, and the width of the screen about 2,8m. The fabric itself is not DIY, and is a fine mesh woven material. The masking system has two tubular motors, which are controlled with relays from one controll...
DIY Screen Mask Question
Hi, I have a 16x9 Stewart Filmscreen with the stock (beveled) black aluminum frame. The surface of the screen is slightly recessed relative to the face of the frame. I have a few ideas with regard to temporarily mounting fabricated masking panels for 2.4:1 viewing. My question is does ...
Has anyone made one of these?
Im hoping someone has designed a frame for a fixed screen that contained rolled black material at the top and bottom to mask the charcoal bars that show in 2.35:1 movies. Ideally the two rollers would be controlled by the same pulley system so that one motion would cause the upper mask to lower a...
DIY motorized masking for retractable screen
Hey everybodyI'm planning to upgrade my screen to 2.35, but I can't get a retractable screen with the features I want with built-in masking. So, I am planning to build the masking system myself external to the screen housing.I wondered if anyone else has done this. It seems reasonably strai...
Read responses in avsforum.com