Neck Board for Barco 1209
Register to remove this ad. It's free!
Hello, I need Neck Board for CRT Projector 1209 Barco.
no picture at green tube
Hello, I have problem at my green tube (Barco 1209 Graphics), no picture but has an orange glow at the tube. I was switch the neck board but still can't working. Pls advice Thank you very much Regards Sukwoto
Barco 919 Video plumbing
Hi Guys, Here is a picture of the 919 video plumbing. Semi ridged coax and SMP connectors fitted to the back of the board. Also have done the neck boards with rigid coax
BARCO 1209 problem
hi everyone. i have a barco 1209s it works fine until now... today there is not picture,not internal paterns and menu. on all tubes when i run it,everything seems to work fine,fans,boards,ect... but i dont get image . anyone have an idea?? EDIT: i try ...
luamgen value for barco 1209s
needs help with lumagen timing value to start with my PJ barco 1209 does anyone have values to start with?
Barco 1209 - Inverted image from green tube
Register to remove this ad. It's free! Hey all, I cant seem to find thoughts on this one in the forums: Last spring at almost exactly this time of year, my green tube started losing its image briefly now and then. It stayed lit, and kept a very low ...
Barco Graphics 1209/2 image flashing once every second
Register to remove this ad. It's free! It worked last time I tured it on one year ago but now the image (all tubes) flashes on-off every second. Menues are shown correct when the image is on. Board 1089195 have a red LED flashing at the same rate. ...
Does anyone have circuitry of CRT socket of BARCO 1209/2?
Does anyone have circuitry of CRT socket and video output board of BARCO 1209/2? My friend is doing the modify job on 1209/2, up to now, he already made a lot of improvement on this set, now he is trying to get biggger bandwidth to totally resovle 1080p, the left side ringing sovled, but 1080...
Read responses in curtpalme.com