Setting 6060 Bias Current
I did look at the sticky but it didn't help me here .
I was trying to use the service manual for the 6060 I downloaded from Hifi Enging. It shows taking the readings for the bias current using R06 / R08 for R channel and R05 / R07 for L side on the F2648 driver board. The driver board in my 6060 is labeled F2647 and I am not sure which resistor pairs to use for the reading for the 15 MV setting
The system seems to be woring OK but I just want to make sure the bias current is correct. I have set the pots to the middle setting in the interm.
Any suggestions on this?
Read responses in audiokarma.org