Toshiba HD crt tv 36HF71 osd menu shakes
Troubleshooting TVs and Video Sources - Badcaps Forums
I have a nice 36 inch hd crt tv but its stored in garage unheated
Its 20degrees f now
I plug it in and power it on and the osd menu shakes bad
Is that due to cold?
Jvc rptv av-48wp30 red crt odd issue
Odd issue i had yesterday with a jvc 48 inch hd rear projection tv.....i powered it on and adjusted convergence and everything seemed great ..picture was great...osd color menu was fine..but then something weird happened....the tint went bad.....reds didnt look right and so i hit menu button and ...
Sony wega Triniron CRT question
My dad recently gave me this old tv so I could use it with all my old school consoles(snes, genesis, etc). First thing I did before even giving this huge thing a good cleaning is turn it on to make sure it still works and it does. However, the menu system flickers or shakes a little bit. I'm refe...
Can edge enhancement on SD flat screen Toshiba CRTs (models xxafxx) be turned off?
I checked out a Toshiba 24af44 recently and noticed that the picture was too sharp and adjusting the user menu sharpness control did nothing to correct for this. I have read this is because of an edge enhancement feature that these Toshiba CRTs have automatically turn on. Some on forums hav...
toshiba 35 " crt
This is a late 90's 35" Toshiba crt, when its first turned on there is horrible pin cushion effects on the screen (see pics of menu, though it affects everything obviously). I assume there is a cap somewhere that has to warm up. What area is this cap likely located? board behind the electron gun?...
Toshiba 36ZP48 CRT problems since changing settings in service menu
The issue is that I changed the settings because the height and width were far too large meaning I had picture chopped off so bad for subtitled movies. Over the course of about 3 weeks I changed the settings quite a few times and all seemed fine till one day I decided to turn on my computer co...
Mitsubishi 2040u service menu
I'm embarrassed that I remember how to exit the factory menu on this CRT but not how to enter it. :) Anyone remember on this dinosaur? I know it's the OSD OFF button held in while the monitor is powered up, and "010" to exit service mode, but what's the magic number to enter it? Thanks in adv...
47L6200U software update problem
HiA customer of mine had bought this toshiba 47L6200U about 3months ago he was watching it and was promtedabout a software update (its connected to the internet) so he applied the update four days later the television only powers on with the toshiba signand does nothing else no menu, no OSD just ...
Read responses in badcaps.net