Using 620 watch and Garmin Connect with poor GPS reporting
I have what i suspect is a workflow problem that i would like some advice on. I am not a "professional" runner i run 2 or 3 times a week between 5-10K each run with an occasional 10K fun run . I used to run in the park with a 610 which measured distance almost perfectly and autolapped to within 5 metres on a measured 2.5 KM track which is good enough for tracking progress at my level. I've recently downsized my accomadation and upsized the watch to a 620 and now run multiple 1000M loops in a city area. Initially the watch would not track at all but after configuring for 1 sec GPS 320M does not track in the GPS correctly producing a zig zag mess. My last two identical runs of 7 laps have come in at 5.2K and 7.4 K
What should be my workflow in a situation where the GPS is unreliable ?
I assume i should switch of the GPS as i can see no way to edit or correct the recorded route in GC
I can hit the lap button to do a manual lap count and I can load the total distance using GC "legacy" full edit feature but is there a way to load lap distances in Garmin connect ?
Is there any way i can preload the 1K route so the watch knows this is my standard course and just records 1K if it hits any of the GPS points on that route.
Read responses in forums.garmin.com